OdorCheck
Like Us on Facebook! Follow Us on Twitter! Send us an email!
Buy Now!

MSDS information

The nuts and bolts of the product.

Odor Check Super Absorbent Fill
MSDS No: 10038

MSDSCHEMICAL PRODUCT
PRODUCT NAME: Synthetic Amorphous Silica
PRODUCT DESCRIPTION: Desiccant
MSDSCHEMICAL PRODUCT
Chemical characterization: Desiccant
Description: Desiccant
Dangerous substance: Not Present
CAS Registry # EINECS  
OSHA PEL: 80 MG/M3 /%SIO2
ACGIH TLV: 10 MG/M#
Appearance & Odor: Dry white granules, beads or powder. No Odor.
Specific Gravity: 2.1
Solubility in Water: Insoluble
PH: Solid N/A
MSDSHAZARDS IDENTIFICATION
Specific hazards for humans and environment:
The product is very absorbent and may have a drying effect on skin and eyes. Silica gel is synthetic amorphous silica not to be confused with crystalline silica. Epidemiological studies indicate low potential from adverse health effects.
MSDSFIRST AID MEASURES
After inhalation: Fresh air
After skin contact: Wash with water
After eye contact: Flush with water
MSDSFIRE FIGHTING MEASURES
Extinguishing media: Media suitable for surrounding fire.
Unusual Fire and Explosive Hazards: None, product will not burn.
MSDSACCIDENTAL RELEASE MEASURES
Personal Precaution: Respiratory protection, eye protection
Methods for cleaning up: Sweep or vacuum the spill area, avoid rising dust. Not known to have any adverse affect on aquatic environment. It is insoluble & non-toxic.
MSDSHANDLING AND STORAGE
Precautions for safe handling: Handling in airtight container, moisture proof and waterproof.
Measures to prevent fire/explosion: Non-flammable or explosive
Storage: Keep tightly sealed to protect quality of product.
MSDSEXPOSURE CONTROLS / PERSONAL PROTECTION
General: See Handling
Other Precautions: Avoid prolonged breathing of dust or contact with skin. Drying action of this material can cause irritation of mucous membranes of nose and throat & irritation of skin.
MSDSPHYSICAL AND CHEMICAL PROPERTIES
Appearance: White semitransparent and glass like
Odor: Without odor
PH: (50 g/1 water) (20° C) 3.5-8
Boiling Point: Not applicable
Melting Point: 1708-1718° C
Flash Point: Not applicable
Solubility: Water Insoluble
MSDSSTABILITY AND REACTIVITY
The product is stable and inert.
MSDSTOXICOLOGICAL INFORMATION
The product is non-toxic.
MSDSECOLOGICAL INFORMATION
Chemically and Biologically inert.
MSDSDISPOSAL CONSIDERATIONS
Landfill according to federal, state and local regulations.
MSDSTRANSPORT INFORMATION
Not dangerous goods according to DOT regulations.
MSDSREGULATORY INFORMATION
Not a dangerous substance according to EEC Council Directive 67/548/EEC as last amended.
MSDSOTHER INFORMATION
The applicable regulations and industrial hygiene standards have to be considered. This information is provided in good faith, but without express or implied warranty.